![]() ![]() And this is the Kel-Tec 3AT disassembled. Now I’m going to push the barrel slightly forward, up and out. Small, large in a lightweight aluminum pin right there. All right, so I pull this off and out, keeping it under control and as you can see this is a dual spring system. If you look at this video on the Internet, don’t point this towards the computer screen. So, always where eye protection and point this away from you. Make sure you have a good grip on that spring and the guide rod before you take it off of the slide. If you let this thing go, it’s going to take off and fly across the room. This is under a tremendous amount of pressure. So I want to point the barrel towards me and the head of this guide rod away from me. It’s a dual spring system that is not captured. This is a lightweight aluminum spring, a recoil guide, and two springs. Now, a lot of semiautomatic pistols I have done reviews of, I have told you it’s not under a great deal of pressure. The next step is to disassemble the upper assembly or slide and that is this wrinkle spring in the barrel in here. Now, again, you don’t have to pull the trigger or anything. Then I’m going to take my fingers and I can pull the pin out. Just until it protrudes past the frame a little bit. I’m just going to use a small, flathead screwdriver, and I’m going to get right here, up under there, and I’m going to pull this pin out ever so slightly. Now, in the owners manual, it shows people doing this with a piece of brass. You just have to work this pin off of the frame a little bit and get out from behind the frame. So, you don’t have to pull the trigger first or anything like that. ![]() But what you do have, right here on the left side of the frame, is this is the takedown pin, right here. It has the trigger, it is the magazine release, and that’s it. Now, the weapon only has a couple of controls. Now I’m going to lock it up like this, by making a lever with my hand and physically inspect the chamber. Let’s clear lock and show safe, this weapon. This one only came with one magazine and it does not, this particular version, did not come with a piece of brass in a sealed envelope. #Kel tec p 11 disassembly instructions how toIt also has a trigger lock assembly which comes in this little plastic bag with instructions on how to put it on. If you ever lose this, Kel-Tec will send you another one for free. #Kel tec p 11 disassembly instructions manualIt comes with a well illustrated color owners manual which I found to be extremely helpful. The box comes with, first of all, the weapon. Now you can lock this box up with either a padlock or a tie, but you know anybody with a screwdriver could force their way into it. But this is a small compact polymer box for small compact polymer weapon. I apologize, the distributor put a big nasty label over the top. Now, let’s take a look at the box and you can see it’s a Kel-Tec box. This is a field strip disassembly and reassembly video of the Kel-Tec 3AT. I’m David Reed with Reed and Ward, the makers of CCW Guardian, the premier smartphone app for CCW permit holders. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |